BSF-150B
BSF-180
BSF-160
BSF-200
A series of high-performance, floor-type horizontal milling and boring machines equipped with a rigid Square-type ram.
Extra rigidity is built into the headstock through a four-sided guided closed-type (square bore) ram guideway. The ram-type headstock provides the following benefits:
- High precision and accuracy is achieved during machining at full power.
- Stabilized accuracy is maintained along the z-axis with the massive ram in long extension.
- Excellent approachability to the work and efficient cutting operations have been assured.
| Machine Specifications | BSF-150B | BSF-160 | |||
Travel |
X-axis travel (Column horizontal) | mm (in) | 6 000 ~ 18
000 : 1 500 step (236 ~ 709 : 59 step) |
||
| Y-axis travel (Spindle head vertical) | mm (in) | 2 500 ~ 4 000 : 500 step (98 ~ 157 : 19.7 step) | 3 000 ~ 4 500 : 500 step (118 ~ 177 : 19.7 step) | ||
| Z-axis travel (Ram travel) | mm (in) | 900 (35.4) |
1 100 (43.3) [1 400 (55.1)] |
||
| W-axis travel (Spindle travel) | mm (in) | 900 (35.4) | |||
| Z & W axis total travel | mm (in) | 1 800 (70.8) | 2 000
(78.7) [2 300 (90.6)] |
||
Ram |
Section of ram | mm (in) | 380 x 380
(15 x 15) |
420 x 420
(16.5 x 16.5) |
|
| Guideways of ram | Four side guided closed type | ||||
Spindle |
Boring spindle diameter | mm (in) | 150 (5.9) | 160 (6.3) | |
| Spindle speed range | min-1 | 10 ~ 2 000 | |||
| Allowable torque on milling spindle | N·m(ft-lbs) | 3450 (2 532) | 5880 (4 340) | ||
| Milling spindle nose diameter | mm (in) | 225 (8.9) | 260 (10.2) | ||
| Type of spindle taper hole | 7/24 taper No.50 | ||||
Feedrate |
Rapid traverse rate | X & Y | mm/min (ipm) | 10 000 (394) | |
| Z & W | mm/min (ipm) | 10 000 (394) | 6 000 (236) | ||
| Feedrate | X, Y, Z | mm/min (ipm) | 1 ~ 4 000 (0.01 ~ 157) | ||
| W | mm/min (ipm) | 1 ~ 4 000 (0.01 ~ 157) | |||
Automatic tool changer (ATC) |
Type of tool shank | MAS BT50 | |||
| Type of retention knob | MAS P50T-1 | ||||
| Tool storage capacity | 60, 90, 120 | 90, 120 | |||
| Maximum tool diameter | When tools are continuously set | mm (in) | 125 (4.9) | 150 (5.9) | |
| When adjacent pots are empty - Disc type cutter | mm (in) | 300 (11.8) | 330 (13) | ||
| When adjacent pots are empty - Single point boring tool | mm (in) | 400 (15.7) | |||
| Maximum tool length | mm (in) | 500 (19.7) |
500 (19.7) [800 (31.5)] |
||
| Maximum tool mass | kg (lbs) | 30 (66) | 35 (77) | ||
| Tool selection | Pot address random - shortest path | ||||
Spindle drive motor |
(30 min./cont. rating) | kW (HP) | AC37/30 (50/40) | AC55/45 (75/60) | |
Accuracy |
Positioning accuracy | X & Y | mm (in) | +/-0.008/1 000 (+/-0.00031/39.4) | +/-0.01/1 000 (+/-0.0004/39.4) |
| Z & W | mm (in) | +/-0.01/900 (+/-0.0004/35) | |||
| Repeatability | mm (in) | +/-0.005 (+/-0.0002) | |||
Note:
Values in brackets [] refer to options.
| Machine Specifications | BSF-180 | BSF-200 | |||
Travel |
X-axis travel (Column horizontal) | mm (in) |
10 500 ~ 18
000 : 1 500 step (413 ~ 709 : 59 step) |
||
| Y-axis travel (Spindle head vertical) | mm (in) | 3
500 ~
5 000 : 500 step (138 ~ 197 : 19.7 step) |
|||
| Z-axis travel (Ram travel) | mm (in) | 1 400 (55.1) | 1 600 (63) | ||
| W-axis travel (Spindle travel) | mm (in) | 1 200 (47.2) | 1 300 (51.2) | ||
| Z & W axis total travel | mm (in) | 2 600 (102.4) | 2 900 (114.2) | ||
Ram |
Section of ram | mm (in) |
500 x 500
(19.7 x 19.7) |
||
| Guideways of ram | Four side guided closed type | ||||
Spindle |
Boring spindle diameter | mm (in) | 180 (7.1) | 200 (7.9) | |
| Spindle speed range | min-1 | 5 ~ 1 250 | |||
| Allowable torque on milling spindle | N·m(ft-lbs) |
9 600 (7 086) |
9 700 (7 150) |
||
| Milling spindle nose diameter | mm (in) | 290 (11.4) | 310 (12.2) | ||
| Type of spindle taper hole | 7/24 taper No.50 on adapter 7/24 taper No.60 | ||||
Feedrate |
Rapid traverse rate | X & Y | mm/min (ipm) | 10 000 (394) | |
| Z & W | mm/min (ipm) | 6 000 (236) | |||
| Feedrate | X, Y, Z | mm/min (ipm) | 1 ~ 4 000 (0.01 ~ 157) | ||
| W | mm/min (ipm) | 1 ~ 4 000 (0.01 ~ 157) | |||
Automatic tool changer (ATC) |
Type of tool shank | MAS BT60 | |||
| Type of retention knob | MAS P60T-1 | ||||
| Tool storage capacity | 90, 120 | ||||
| Maximum tool diameter | When tools are continuously set | mm (in) | 150 (5.9) | ||
| When adjacent pots are empty - Disc type cutter | 330 (13) | ||||
| When adjacent pots are empty - Single point boring tool | 400 (15.7) | ||||
| Maximum tool length | mm (in) |
500 (19.7) [800 (31.5)] |
|||
| Maximum tool mass | kg (lbs) | 35 (77) | |||
| Tool selection | Pot address random - shortest path | ||||
Spindle drive motor |
(30 min./cont. rating) | kW (HP) | AC75/60 (100/80) |
AC130/110 (175/160) |
|
Accuracy |
Positioning accuracy | X & Y | mm (in) | +/-0.01/1 000 (+/-0.0004/39.4) |
|
| Z & W | mm (in) | +/-0.01/900 (+/-0.0004/35) | |||
| Repeatability | mm (in) | +/-0.005 (+/-0.0002) | |||
Note:
Values in brackets [] refer to options.
The values in the specifications indicate the maximum capacity. If a continuous operation is required at the maximum capacity, please contact us for consultation.
Machine dimensions and floor plan
| Dimensions | BSF-150B | BSF-160 | BSF-180 | BSF-200 | |
| X | mm (in) | 10 500 (413) | 15 000 (591) | 16 500 (650) | 16 500 (650) |
| Y | mm (in) | 3 500 (138) | 4 500 (177) | ||
| Z | mm (in) | 900 (35.4) | 1 100 (43.3) | 1 400 (55.1) | 1 600 (63) |
| W | mm (in) | 900 (35.4) | 1 200 (47.2) | 1 300 (51.2) | |
| A (pit length) | mm (in) | 16 000 (630) | 21 180 (834) | 23 700 (933) | |
| B (see note) | mm (in) | BR-20/25D-20 11 090 (437) |
BR-30/35D-25 14 200 (559) |
BR-30/35D-25 15 160 (597) |
BR-30/35D-25 15 300 (602) |
| C (pit width) | mm (in) | 2 875 (113) | 4 050 (159) | 4 100 (161) | |
| D | mm (in) | 15 045 (592) | 20 580 (810) | 23 200 (913) | |
| E (machine width) | mm (in) | 5 650 (222) | 6 390 (252) | 7 850 (309) | 8 250 (325) |
| F | mm (in) | 1 210 (47.6) | 1 235 (48.6) | 1 375 (54.1) | |
| G | mm (in) | 5 850 (230) | 7 600 (299) | 8 100 (319) | 8 800 (346) |
| H (machine height) | mm (in) | 7 060 (278) | 8 835 (348) | 9 475 (373) | 10 175 (401) |
| I | mm (in) | 1 800 (70.9) | 2 000 (78.7) | 2 600 (102.4) | 2 900 (114.2) |
| J | mm (in) | 150 (5.906) | 160 (6.299) | 180 (7.087) | 200 (7.87) |
| K | mm (in) | 380 (15) | 420 (16.5) | 500 (19.7) | |
| L | mm (in) | 250 (9.8) | 300 (11.8) | 350 (13.8) | |
Note: These dimensions apply when a rotary table is in use.
Due to technology developments or advancements, all machine specifications, dimensions and design characteristics are subjected to change without notice.