BTF-130.R22
Designed for heavy-weight workpieces for mold and die-making. Suitable machine for big and deep machining.
Return to Machine Tool Line-up| Machine Specifications | BTF-130.R22 | ||||
| Standard spindle | High speed spindle | ||||
Travel |
X-axis travel (Cross movement of table) | mm (in) | 3 000 (118.1) | ||
| Y-axis travel (Vertical movement of spindle head) | mm (in) | 2 300(90.5) | |||
| Z-axis travel (Longitudinal movement of table) | mm (in) | 1 600 (63) | |||
| W-axis travel | mm (in) |
700 (27.6) spindle extension |
400 (15.7) ram extension |
||
| Distance from table surface to spindle center | mm (in) | 0 ~ 2 300 (90.6) | |||
| Distance from table center to milling spindle gauge plane | mm (in) | 850 ~ 2 450 (33.5 ~ 96.5) | |||
| Maximum workpiece size | mm (in) | ø2 800(110.2)(swing) x 2 300(90.6)(height) | |||
| Splash cover opening width | mm (in) | 2 400 (94.5) | |||
Table |
Table working surface | mm (in) | 1 800 x 2 200 (70.9 x 86.6) | ||
| Table loading capacity | kg (lbs) | 20 000(44 000) | |||
| Table surface configuration | mm (in) |
11 T-slots, size 22, pitch 160 (11 T-slots, size 0.8661, pitch 6.3) |
|||
| Minimum table indexing angle (B-axis) | degrees | 0.0001 | |||
Spindle |
Spindle diameter | mm (in) | 130 (5.1) | --- | |
| Spindle speed range | min-1 | 20 ~ 3 500 | 40 ~ 12 000 | ||
| Milling spindle nose diameter | mm (in) | 250 (9.8) | --- | ||
| Ram nose diameter | mm (in) | --- | 190 (7.5) | ||
| Ram section | mm (in) | --- |
 380 (15) |
||
| Type of spindle taper hole | 7/24 ISO 50 | ||||
Feedrate |
Rapid traverse rate | X, Y, Z | mm/min (ipm) | 18 000 (708.7) | |
| W | mm/min (ipm) | 5 000 (196.9) | 10 000 (393.7) | ||
| B | deg/min | 500 | |||
| Feedrate | X, Y, Z | mm/min (ipm) | 1 ~ 10 000 (0.04 ~ 393.7) | ||
| W | mm/min (ipm) | --- |
1 ~ 8 000 (0.04 ~ 315) |
||
Automatic tool changer |
Type of tool shank | CAT-50 | |||
| Type of retention knob | MAS P50T-1 (45 degree) | ||||
| Tool storage capacity | 38 [60, 90, 120] | ||||
| Maximum tool diameter | When adjacent pots are filled | mm (in) | 125 (4.9) | ||
| When adjacent pots are empty | mm (in) | 240 (9.4) | |||
| Maximum tool length | mm (in) | 400 (15.7) | |||
| Maximum tool mass | kg (lbs) | 25 (55) | |||
| Tool selection | Pot address random short-cut | ||||
Spindle drive motor |
kW | AC30 (20 min 50% ED)/20 (cont.) | AC22 (2min)/18.5 (cont.) | ||
Power source |
Electric power supply | AC200/220V +/-10%, 50/60Hz +/-2% | |||
| Power Capacity | kVA | 86 | |||
| Compressed air supply | Pressure | MPa (psi) [kgf/cm2] |
0.5 ~ 0.8 (72.5 ~ 116) [5 ~ 8] | ||
| Flowrate | Nl/min(SCFM) | 900 (32.0) | |||
Machine size |
Machine height | mm (in) | 5 160(203.1) | ||
| Floor space | mm (in) | 8 810 x 9 000 (346.9 x 354.3) | |||
| Mass of machine (including NC equipment) | kg (lbs) | 40 000 (88 000) | |||
Accuracy |
Positioning accuracy | X, Y, Z | mm/min | +/-0.016 (0.0006) per full length | |
| W | +/-0.012 (0.0005) per full length | ||||
| Repeatability | X, Y, Z | +/-0.007 (0.00027) | |||
| W | +/-0.008 (0.00031) | ||||
| Table indexing accuracy (arbitrary angle) | sec | +/-3 | |||
| Table indexing repeatability (arbitrary angle) | sec | +/-1.5 | |||
Machine colour |
R4-383 (Munsell 5Y8.4/0.5) and N2.5 For the NC system, servo motors and cooler, each maker's standard colour shall apply |
||||
Notes:
The values in the specifications
indicate the maximum capacity. If a
continuous operation is required at the
maximum capacity, please
contact us for
consultation.
Due to technology developments or advancements, all machine specifications, dimensions and design characteristics are subjected to change without notice.