MPC-B Series
A highly productive, yet versatile, designed and engineered machine.
A double column machining center, meeting all the prerequisites of a production plant.
Equipped with TOSNUC 888 for easy programming and simplified MDI &. NC operations.
Return to Machine Tool Line-up| Machine Specifications | 2640B | 2650B | 2665B | |||
Travel |
X-axis travel (table) | in (ft) | 16.4 (5 000) | 19.7 (6 000) | 24.6 (7 500) | |
| Y-axis travel (spindle head) | 11.2 (3 400) | |||||
| Z-axis travel (ram) | 35.4 (900) | |||||
| W-axis travel (vertical movement of crossrail | **Height: 68.9 (1 750) |
in (mm) | 35.4 (900) | |||
| **Height: 96.5 (2 450) |
63.0 (1 600) | |||||
| **Height: 124 (3 150) |
90.6 (2 300) | |||||
| Height (distance from table top to vertical spindle nose of 5-face cutter head) | Select
either 68.9, 96.5
or 124 (1 750, 2 450 or 3 150) |
|||||
| Distance between columns (max. width between columns through which workpiece goes through) | 102.4 (2 600) | |||||
Table |
Table working surface | in (mm) | 86.6 x 157.5 (2 200x4 000) |
86.6 x 196.8 (2 200x5 000) |
86.6 x 255.9 (2 200x6 500) |
|
| Table loading capacity | Plain table type | lbs (kg) | 66 000 (30 000) | 77 000 (35 000) | 88 000 (40 000) | |
| AWC (DTC) type | 44 000 (20 000) | |||||
Spindle |
Spindle speed range | mim-1 | 5 ~ 3 000 | |||
| Type of spindle taper hole | 7/24 taper No.50 | |||||
| Maximum spindle torque | ft·lbs (N·m) | 1 600 (2 170) | ||||
| Spindle bearing inner diameter | in (mm) |
Vertical spindle 3.937 (100) Horizontal spindle 4.724 (120) (5-faced cutter head) |
||||
Spindle ram |
Section | in (mm) | 14.96 x 14.96 (380 x 380) | |||
Feedrate |
Rapid traverse rate | fpm (mm/min) |
X, Y: 65.6 (20 000) (stroke center)/29.5
(9 000) (stroke end) Z: 32.8 (10 000), W: 9.8 (3 000) |
|||
| Feedrate |
X, Y, Z: 0.1~236 (1~6 000) W: 0.1~118 (1~3 000) |
|||||
Power Sources |
||||||
| Electrical power supply | AC 200/220V +/-10%, 50/60 Hz +/-1Hz | |||||
| Power capacity (incl. capacity for options) | 120kVA (Power supply for air compressor should be provided separately) | |||||
| Compressed air to be supplied (compressed air supply for blower excluded) | 0.5~0.8
Mpa {5~8 kgf/cm2} (71~114 psi) 1 200 normal liters/min (42.4 ft3/min) Compressed air must not contain oil, moisture &/or dust. |
|||||
Motors |
Spindle motor (50%ED/cont.)* | kW | AC 30/22 | |||
Machine size |
Height | **Height: 68.9 (1 750) |
ft (mm) | 21.5 (6 560) | ||
| **Height: 96.5 (2 450) |
23.8 (7 260) | |||||
| **Height: 124 (3 150) |
26.1 (7 960) | |||||
| Floor area | Plain table type | 25.9 X 44 7 900 X 13 400 |
25.9 X 50.5 7 900 X 15 400 |
25.9 X 60.7 7 900 X 18 500 |
||
| AWC type | 27.6 X 58.1 8 400 X 17 700 |
27.6 X 68.2 8 400 X 20 800 |
27.6 X 83.7 8 400 X 15 500 |
|||
| Mass (height of 68.9 (1 750)***) |
lbs (kg) |
132 000 (60 000) |
143 000 (65 000) |
160 600 (73 000) |
||
CNC system |
||||||
| TOSNUC 888 | ||||||
Accuracy |
||||||
| Positioning accuracy | in (mm) | +/-0.0003/40 (+/-0.007/1 000) | ||||
| Repeatability | +/-0.00012 (+/-0.003) | |||||
| per standard test chart (testing method & tolerances) | ||||||
Machine colour |
||||||
| Standard paint color (urethane painting) | Munsell
5Y7.5/1 (ivory white) (excluding machine name/model indication on the saddle front, pendant operation box, company nameplate & equipment purchased from other manufacturers) |
|||||
| Machine Specifications | 3150B | 3165B | 3180B | |||
Travel |
X-axis travel (table) | in (ft) | 19.7 (6 000) | 24.6 (7 500) | 29.5 (9 000) | |
| Y-axis travel (spindle head) | 12.8 (3 900) | |||||
| Z-axis travel (ram) | 35.4 (900) | |||||
| W-axis travel (vertical movement of crossrail | **Height: 68.9 (1 750) |
in (mm) | 35.4 (900) | |||
| **Height: 96.5 (2 450) |
63.0 (1 600) | |||||
| **Height: 124 (3 150) |
90.6 (2 300) | |||||
| Height (distance from table top to vertical spindle nose of 5-face cutter head) | Select
either 68.9, 96.5
or 124 (1 750, 2 450 or 3 150) |
|||||
| Distance between columns (max. width between columns through which workpiece goes through) | 122.0 (3 100) | |||||
Table |
Table working surface | in (mm) | 106.3 x 196.8 (2 700x5 000) |
106.3 x 255.9 (2 700x6 500) |
106.3 x 314.9 (2 700x8 000) |
|
| Table loading capacity | Plain table type | lbs (kg) | 77 000 (35 000) | 88 000 (40 000) | ||
| AWC (DTC) type | 44 000 (20 000) | |||||
Spindle |
Spindle speed range | mim-1 | 5 ~ 3 000 | |||
| Type of spindle taper hole | 7/24 taper No.50 | |||||
| Maximum spindle torque | ft·lbs (N·m) | 1 600 (2 170) | ||||
| Spindle bearing inner diameter | in (mm) |
Vertical spindle 3.937 (100) Horizontal spindle 4.724 (120) (5-faced cutter head) |
||||
Spindle ram |
Section | in (mm) | 14.96 x 14.96 (380 x 380) | |||
Feedrate |
Rapid traverse rate | fpm (mm/min) |
X, Y: 65.6 (20 000) (stroke center)/29.5
(9 000) (stroke end) Z: 32.8 (10 000), W: 9.8 (3 000) |
|||
| Feedrate |
X, Y, Z: 0.1~236 (1~6 000) W: 0.1~118 (1~3 000) |
|||||
Power Sources |
||||||
| Electrical power supply | AC 200/220V +/-10%, 50/60 Hz +/-1Hz | |||||
| Power capacity (incl. capacity for options) | 120kVA (Power supply for air compressor should be provided separately) | |||||
| Compressed air to be supplied (compressed air supply for blower excluded) | 0.5~0.8
Mpa {5~8 kgf/cm2} (71~114 psi) 1 200 normal liters/min (42.4 ft3/min) Compressed air must not contain oil, moisture &/or dust. |
|||||
Motors |
Spindle motor (50%ED/cont.)* | kW | AC 30/22 | |||
Machine size |
Height | **Height: 68.9 (1 750) |
ft (mm) | 21.5 (6 560) | ||
| **Height: 96.5 (2 450) |
23.8 (7 260) | |||||
| **Height: 124 (3 150) |
26.1 (7 960) | |||||
| Floor area | Plain table type | 27.6 X 50.5 8 400 X 15 400 |
27.6 X 60.7 8 400 X 18 500 |
27.6 X 70.9 8 400 X 21 600 |
||
| AWC type | 32.5 X 68.2 9 900 X 20 800 |
32.5 X 83.7 9 900 X 25 500 |
32.5 X 99.1 9 900 X 30 200 |
|||
| Mass (height of 68.9 (1 750)***) |
lbs (kg) |
158 400 (72 000) |
176 000 (80 000) |
198 600 (90 000) |
||
CNC system |
||||||
| TOSNUC 888 | ||||||
Accuracy |
||||||
| Positioning accuracy | in (mm) | +/-0.0003/40 (+/-0.007/1 000) | ||||
| Repeatability | +/-0.00012 (+/-0.003) | |||||
| per standard test chart (testing method & tolerances) | ||||||
Machine colour |
||||||
| Standard paint color (urethane painting) | Munsell
5Y7.5/1 (ivory white) (excluding machine name/model indication on the saddle front, pendant operation box, company nameplate & equipment purchased from other manufacturers) |
|||||
| Machine Specifications | 3665B | 3680B | |||
Travel |
X-axis travel (table) | in (ft) | 24.6 (7 500) | 29.5 (9 000) | |
| Y-axis travel (spindle head) | 11.2 (3 400) | ||||
| Z-axis travel (ram) | 35.4 (900) | ||||
| W-axis travel (vertical movement of crossrail | **Height: 68.9 (1 750) |
in (mm) | 35.4 (900) | ||
| **Height: 96.5 (2 450) |
63.0 (1 600) | ||||
| **Height: 124 (3 150) |
90.6 (2 300) | ||||
| Height (distance from table top to vertical spindle nose of 5-face cutter head) | Select
either 68.9, 96.5
or 124 (1 750, 2 450 or 3 150) |
||||
| Distance between columns (max. width between columns through which workpiece goes through) | 141.7 (3 600) | ||||
Table |
Table working surface | in (mm) | 122.4 x 255.9 (3 100x6 500) |
122.4 x 314.9 (3 100x8 000) |
|
| Table loading capacity | Plain table type | lbs (kg) | 88 000 (40 000) | ||
| AWC (DTC) type | 44 000 (20 000) | ||||
Spindle |
Spindle speed range | mim-1 | 5 ~ 3 000 | ||
| Type of spindle taper hole | 7/24 taper No.50 | ||||
| Maximum spindle torque | ft·lbs (N·m) | 1 600 (2 170) | |||
| Spindle bearing inner diameter | in (mm) |
Vertical spindle 3.937 (100) Horizontal spindle 4.724 (120) (5-faced cutter head) |
|||
Spindle ram |
Section | in (mm) | 14.96 x 14.96 (380 x 380) | ||
Feedrate |
Rapid traverse rate | fpm (mm/min) |
X, Y: 65.6 (20 000) (stroke center)/29.5
(9 000) (stroke end) Z: 32.8 (10 000), W: 9.8 (3 000) |
||
| Feedrate |
X, Y, Z: 0.1~236 (1~6 000) W: 0.1~118 (1~3 000) |
||||
Power Sources |
|||||
| Electrical power supply | AC 200/220V +/-10%, 50/60 Hz +/-1Hz | ||||
| Power capacity (incl. capacity for options) | 120kVA (Power supply for air compressor should be provided separately) | ||||
| Compressed air to be supplied (compressed air supply for blower excluded) | 0.5~0.8
Mpa {5~8 kgf/cm2} (71~114 psi) 1 200 normal liters/min (42.4 ft3/min) Compressed air must not contain oil, moisture &/or dust. |
||||
Motors |
Spindle motor (50%ED/cont.)* | kW | AC 30/22 | ||
Machine size |
Height | **Height: 68.9 (1 750) |
ft (mm) | 21.5 (6 560) | |
| **Height: 96.5 (2 450) |
23.8 (7 260) | ||||
| **Height: 124 (3 150) |
26.1 (7 960) | ||||
| Floor area | Plain table type | 29.2 X 60.7 8 900 X 18 500 |
29.2 X 70.9 8 900 X 21 600 |
||
| AWC type | 37.4 X 83.7 11 400 X 25 500 |
37.4 X 99.7 11 400 X 30 200 |
|||
| Mass (height of 68.9 (1 750)***) |
lbs (kg) |
194 400 (87 000) |
213 400 (97 000) |
||
CNC system |
|||||
| TOSNUC 888 | |||||
Accuracy |
|||||
| Positioning accuracy | in (mm) | +/-0.0003/40 (+/-0.007/1 000) | |||
| Repeatability | +/-0.00012 (+/-0.003) | ||||
| per standard test chart (testing method & tolerances) | |||||
Machine colour |
|||||
| Standard paint color (urethane painting) | Munsell
5Y7.5/1 (ivory white) (excluding machine name/model indication on the saddle front, pendant operation box, company nameplate & equipment purchased from other manufacturers) |
||||
Notes:
* 50% ED refers to the maximum output when the motor revolves for 5 minutes and stops for 5 minutes at a rate of 10 minutes/1 cycle.
** Distance from table top to vertical spindle nose of 5-faced cutter head.
*** Plain table type (with 60-tool ATC, chip conveyor and coolant unit).
General View
Plan View
| Model | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O |
| 2640 | 7314 (288.0) |
3272 (142.5) |
3270 (128.7) |
2050 (80.7) |
1700 (66.9) |
124 (4.9) |
300 (11.8) |
13350 (526) |
7300 (287) |
5700 (224) |
4000 (157.5) |
1200 (47.3) |
2200 (87) |
7900 (331) |
3810 (150) |
| 2650 | 15400 (606) |
8300 (327) |
6750 (266) |
5000 (197) |
1250 (49.2) |
||||||||||
| 2665 | 18500 (728) |
9800 (386) |
8350 (329) |
6500 (256) |
1350 (53.1) |
||||||||||
| 3150 | 7825 (308.0) |
3870 (152.4) |
3520 (138.6) |
2300 (90.6) |
1950 (76.8) |
130 (5.1) |
305 (12.0) |
15400 (606) |
8300 (327) |
6750 (266) |
5000 (197) |
1250 (49.2) |
2700 (106) |
8400 (331) |
4060 (160) |
| 3165 | 18500 (728) |
9800 (386) |
8350 (329) |
6500 (256) |
1350 (53.1) |
||||||||||
| 3180 | 21600 (850) |
11350 (447) |
9900 (354) |
8000 (315) |
1400 (55.1) |
||||||||||
| 3665 | 8490 (344.3) |
4120 (162.2) |
3770 (148.4) |
2550 (100.4) |
2200 (86.8) |
215 (8.5) |
385 (11.2) |
18500 (728) |
9800 (386) |
8350 (329) |
6500 (256) |
1350 (53.1) |
3100 (122) |
8900 (350) |
4310 (170) |
| 3680 | 21600 (850) |
11350 (447) |
9900 (354) |
8000 (315) |
1400 (55.1) |
mm (in)
Plan View
| Model | P | Q | R | S | T | U | V | W | X | Y |
| 2640 | 17670 (696) |
7800 (307) |
4670 (184) |
4000 (157) |
2200 (87) |
1200 (47.3) |
8400 (331) |
3870 (152) |
6000 (236) |
9870 (389) |
| 2650 | 20770 (818) |
8800 (346) |
5670 (223) |
5000 (197) |
1300 (51.2) |
4870 (192) |
7100 (280) |
11970 (471) |
||
| 2665 | 25470 (1003) |
10400 (409) |
7170 (282) |
6500 (256) |
1400 (55.1) |
6370 (251) |
8700 (343) |
15070 (593) |
||
| 3150 | 20770 (818) |
8800 (346) |
5670 (223) |
5000 (197) |
2700 (106) |
1550 (51.2) |
9900 (390) |
4870 (192) |
7100 (280) |
11970 (471) |
| 3165 | 25470 (1003) |
10400 (409) |
7170 (282) |
6500 (256) |
1400 (55.1) |
6370 (251) |
8700 (343) |
15070 (593) |
||
| 3180 | 30170 (1188) |
11950 (470) |
8670 (341) |
8000 (315) |
15500 (61.0) |
7870 (310) |
10350 (408) |
18220 (717) |
||
| 3665 | 25470 (1003) |
10400 (409) |
7170 (282) |
6500 (256) |
3100 (122) |
1400 (55.1) |
11300 (445) |
6370 (251) |
8700 (353) |
15070 (593) |
| 3680 | 30170 (1188) |
11950 (470) |
8670 (341) |
8000 (315) |
1550 (61.1) |
7870 (310) |
10350 (408) |
18220 (717) |
mm (in)
Due to technology developments or advancements, all machine specifications, dimensions and design characteristics are subjected to change without notice.