TMD 13
TMD 20
TMD 16
The TMD is an advanced high speed, high accuracy 3-axis controlled turning center with heavy duty machining capabilities.
Based on our TUD series general-purpose vertical tuning machines, the TMD series is also incorporated with milling and table index functions. In addition to all turning operations, complex machining operations such as milling, boring, drilling and tapping can be all accomplished in only one work piece setup.
Return to Machine Tool Line-up| Machine Specifications | TMD-13 | TMD-16 | TMD-20 | |||
Capacity |
Table diameter | mm (in) | 1 250 (49.2) | 1 600 (63.0) | 2 000 (78.7) | |
| Maximum swing | 1 600 (63.0) | 2 000 (78.7) | 2 500 (98.4) | |||
| Maximum height from table top to ram bottom | without APC | 1 300 (51.2) | 1 550 (61.0) | 1 800 (70.9) | ||
| with APC | 1 100 (43.3) | 1 350 (53.1) | 1 550 (61.0) | |||
| Maximum cutting height | without APC | 1 100 (43.3) | 1 350 (53.1) | 1 600 (63.0) | ||
| with APC | 900 (35.4) | 1 150 (45.3) | 1 350 (53.1) | |||
| Maximum cutting diameter | 1 600 (63.0) | 2 000 (78.7) | 2 500 (98.4) | |||
| Maximum cutting force of ram | N [kgf(lbs)] | 24 500 [2 500 (5 500)] | ||||
| Maximum load on table | on the Machine | kg (lbs) |
8 000 (17 600) |
10 000 (22 000) |
15 000 (33 000) |
|
| on the APC |
4 000 (8 800) |
5 000 (11 000) |
7 000 (15 400) |
|||
Travel |
Horizontal travel of rail head | mm (in) | -630~920 (-24.8~36.2) |
-805~1
120 (-31.7~44.1) |
-1 005~1 370 (-39.6~53.9) |
|
| Vertical travel of ram | 800 (31.5) | 1 050 (41.3) | ||||
| Vertical travel of crossrail | 500 (19.7) | 750 (29.5) | ||||
Table |
Table speeds | min-1 | 2 ~ 360 | 2 ~ 280 | 1 ~ 200 | |
| Number of table speed ranges | 2 ranges | |||||
| Maximum table torque | N·m [kgf(ft·lbs)] |
13 230 [1 350 (9 760)] |
21 560 [2 200 (15 910)] |
24 500 [2 500 (18 080)] |
||
Spindle |
Spindle speeds | min-1 | 12 ~ 1 500 | |||
| Maximum spindle torque | N·m [kgf(ft·lbs] | 382 [39 (285)] | ||||
Feedrate |
Rapid traverse rate of rail head (X-axis) | mm/min (ipm) | 12 000 (472) | 10 000 (384) | ||
| Rapid traverse rate of ram (Z-axis) | 8 000 (315) | |||||
| Feedrate (X and Z axis) | 1 ~ 2 000 (0.1 ~ 78.7) | |||||
| Rapid traverse rate of table (C-axis) | deg/min | 1 080 | 800 | 630 | ||
| Table feedrate (C-axis) | 1 ~ 315 | |||||
| Vertical travel speed of crossrail | mm/min (ipm) | 300 (11.8) | ||||
Ram |
Type | Square, fully enclosed type | ||||
| Guideway | 4 guideways closed type | |||||
| Section | mm(in) | 220 x 220 (8.66 x 8.66) | ||||
Tool |
Type of tool shank | ISO taper No.50 | ||||
| Type of pull stud | 50P | |||||
Motors |
Table drive motor (30 min/cont.) | kW(HP) | VAC 37/30 (50/40) | VAC 45/37 (60/50) | ||
| Spindle drive motor (30 min/cont.) | VAC 15/11 (20/14.7) | |||||
| Feed motors (30 min/cont.) | X, Z, C axis: AC3.3 (4.4) | |||||
Power sources |
Electrical power supply | AC 200/220V +/-10%, 50/60Hz +/-1Hz | ||||
| Power capacity | kVA | 90 | 100 | |||
| Compressed air supply | Pressure | MPa (psi) | 0.5 ~ 0.8 (72.5 ~ 116.0) | |||
| Flowrate | Without APC | L/min (SCFM) | 300 (11) air compressor 2.2kW [3.0HP] with ATC | |||
| With APC | 720 (25) air compressor 5.5kW [7.4HP] with ATC, APC | |||||
Machine size |
Machine height | mm(in) | 5 335 (210) | 5 585 (219.8) | 6 385 (251.3) | |
| Floor space | Without APC | 4 460 x 5 740 (176 x 226) |
4 805 x 6 080 (190 x 240) |
5 790 x 6 670 (228 x 263) |
||
| With APC |
6 520 x 6 620 (257 x 260) |
7 320 x 7 360 (289 x 290) |
8 885 x 8 400 (350 x 331) |
|||
| Machine weight (not including options) |
Without APC | kg(lb) |
20 000 (44 090) |
24 000 (52 900) |
34 000 (75 000) |
|
| With APC |
28 000 (61 730) |
33 000 (72 750) |
49 000 (108 000) |
|||
Accuracy |
||||||
| Positioning accuracy of linear axis | mm(in) | +/-0.007/500 (+/-0.0003/20) | ||||
| Repeatability of linear axis | +/-0.003 (+/-0.0001) | |||||
| Positioning accuracy of rotary axis | +/-10"/360° | |||||
| Repeatability of rotary axis | +/-5" | |||||
Paint color |
||||||
| Standard exterior paint color | Munsell 5Y8.4 / 0.5 | |||||
| Standard interior paint color | Munsell 10YR8 / 4 | |||||
Machine general views
Due to technology developments or advancements, all machine specifications, dimensions and design characteristics are subjected to change without notice.