TUE Series
TUE Series of Vertical Boring and Turning Mills are the TUE 150(S) and TUE 200(S) with greater feedrate and table speeds.
Return to Machine Tool Line-up| Machine Specifications | TUE-150 (S) | TUE-200 (S) | |||
Capability & capacity |
Table diameter | in (mm) | 57.08 (1 450) | 78.74 (2 000) | |
| Maximum swing | in (mm) | 78.74 (2 000) | 94.48 (2 400) | ||
| Maximum height from table top to rail-head bottom | in (mm) | 67.71 (1 720) | |||
| Maximum cutting height | in (mm) | 61.02 (1 550) | |||
| Maximum cutting diameter | in (mm) | 78.74 (2 000) | 94.48 (2 400) | ||
| Maximum cutting force of ram | lbf (N) | 5 612 (25 000) | |||
| Maximum table load | lbf (kg) | 17 600 (8 000) | 33 070 (15 000) | ||
Travel |
Horizontal travel of rail head (X-axis) | in (mm) |
-3.94 ~ 43.31 (-100 ~ 1 150) |
-1.97 ~ 53.15 (-50 ~ 1 350) |
|
| Vertical travel of ram (Z-axis) | in (mm) | 35.43 (900) | |||
| Vertical travel of arm (Not NC controlled) | in (mm) | 39.37 (1 000) | |||
Table |
Rotation speed | min-1 | 2 ~ 400 | 1 ~ 240 | |
| Number of shifting range | 2 steps | ||||
| Maximum torque | ft·lbs (N·m) | 15 490 (20 930) | 23 237 (31 396) | ||
Feedrate |
Rapid traverse rate of rail head (X-axis) | ipm(mm/min) | 590.55 (15 000) | ||
| Rapid traverse rate of ram (Z-axis) | ipm(mm/min) | 472.44 (12 000) | |||
| Feedrate (X,Z-axis) | ipm(mm/min) | 0.04 ~ 78.74 (1 ~ 2 000) | |||
| Speed of ram elevation | ipm(mm/min) | 11.81 (300) | |||
| Table rapid indexing speed (C-axis) | deg/min | 720 | |||
| Table indexing speed (C-axis) | deg/min | 1 ~ 360 | |||
Ram |
Type | Automatic tool clamp | |||
| Guideway | Open type | ||||
| Section | mm | 250 x 230 | |||
Tool |
Shank size | in (mm) | 1.3 x 1.3 (32 x 32) | ||
| Type of shank | 7/24 taper No. 50 | ||||
| Pull stud | 50PU (JIS B6399-1986) | ||||
Spindle |
Spindle speed | min-1 | 15 ~ 3 000 | ||
| Maximum torque | ft·lbs (N·m) | 172.44 (233) | |||
Motors |
Table drive motor (30 min/cont.) | kW | AC 45/37 | ||
| Feed servo motor (X, Z axis) | kW | AC 4.0 | |||
| Spindle drive motor (30 min/cont.) | kW | AC 18.5/15 | |||
Power source |
|||||
| Electrical power supply | AC 220/200V +/-10%, 60/50 Hz +/- 1 Hz | ||||
| Power capacity | kVA | 85 | |||
Machine size |
Height | According to the general view | |||
| Floor area | According to the general view | ||||
| Machine weight | lbs (kg) |
37 480 (17 000) |
38 503 (22 000) |
||
Accuracy |
Positioning accuracy | X, Z | in (mm) | +/-0.0003/20 (+/-0.007/500) | |
| X | +/-0.0006/40 (+/-0.015/1 000) | ||||
| Z | +/-0.0006/36 (+/-0.015/900) | ||||
| Repeatability | in (mm) | +/-0.00012 (+/-0.003) | |||
Machine colour |
|||||
| R4-383 (Munsell
5Y8.4/0.5) and (Munsell 10YR 8/4) Manufacturer's standard colour shall apply |
|||||
General View
Due to technology developments or advancements, all machine specifications, dimensions and design characteristics are subjected to change without notice.